Magnetic Mounting: Easy, Safe & Damage-Free

Mount your metal poster in seconds—just place, adjust, and enjoy! Perfect for renters and decorators who love flexibility, our system is easy to move and leaves your walls spotless.

Need Extra Magnetic Mounting Kit?
Click to Shop


Easy as 1, 2, 3

01. For the best results, ensure the wall is clean and dry. Use a dry wipe to remove any dust or dirt before mounting your poster.
02. Peel off the backing paper and stick the leaf onto the wall. Press firmly around the edges to smooth out any air bubbles for a secure hold.
03. Peel off the protective foil from the back of the magnet to prepare it for mounting.
04. Place the magnet in the center of the protective leaf and press firmly to ensure a strong hold.
05. Hang your Metal Poster. Position it just the way you like and show off your style!

Damage-free protective leaf Removal

Safe Wall Magnet Mounting System

Our mounting kit is designed for clean, dry, degreased, smooth, and even surfaces. The effectiveness of the mounting system depends on the surface quality, so avoid textured or uneven surfaces like the ones listed below:
– Rough or grainy walls
– Brick or concrete surfaces
– Fabric or wallpaper-covered walls
– Moist or damp surfaces
If your wall has a light texture, you can reinforce the mounting by gently tapping one or two small headless nails into any two corners of the magnet. This will help the magnet stay firmly attached to the wall while keeping the setup clean and minimal.
We don’t recommend hanging your metal poster in areas with high humidity, such as bathrooms or kitchens. Moisture can affect the adhesive pads and reduce the magnet’s holding strength over time.
It’s not recommended to mount the magnets directly on wallpaper, as removing the adhesive could damage the paper surface. If you still wish to try, ensure the wallpaper is smooth and firmly attached to the wall.
Our mounting system is designed for indoor use only. Outdoor environments can expose the adhesive to moisture, temperature fluctuations, and UV light, which may weaken the bond and affect durability.
When properly removed, the magnets shouldn’t damage your wall paint. Slowly peel the adhesive pad off the wall by pulling it gently downward, keeping it parallel to the surface. Avoid pulling it straight out, as that can lift the paint.
The magnets themselves won’t lose their magnetic power under normal conditions. However, the adhesive pads may lose stickiness if exposed to humidity, dust, or oily surfaces. Make sure the wall is clean and dry before applying.
Yes! You can purchase additional Magnetic Mounting Kits together with your metal poster. ⚠️ Important Note: This item cannot be purchased alone. It must be ordered together with at least one metal poster. Any orders for magnetic kits without a poster will be automatically canceled and refunded. Since the kit ships together with your poster, adding it does not increase your shipping cost.